Note: This syllabus is same for AE(II Yr - II Sem), AU, ME, ME(Nano Tech), Mining Engg.. ME(Production) syllabus mentioned below.

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD 
II Year B.Tech. AE - II Sem      L  T/P/D  C 
                                               -   - / 3 /-  2 
ELECTRICAL AND ELECTRONICS ENGINEERING LAB 

SECTION A: ELECTRICAL ENGINEERING:

1. Verification of KCL and KVL.
2. Magnetization characteristics of D.C. Shunt generator.
3. Speed control of DC motor.
4. Swinburne's Test on DC shunt machine.
5. Brake test on DC shunt motor.
6. OC and SC tests on Single-phase transformer.
7. Brake test on 3-phase induction motor.
8. Regulation by an alternator by synchronous impedance method.

SECTION B: ELECTRONICS ENGINEERING

1. PN Junction Diode Characteristics (Forward bias, Reverse bias)
2. Transistor CE Characteristics (Input and Output)
3. Study of CRO.
4. Class A Power Amplifier
5. Zener Diode Characteristics
6. Transistor CE Characteristics
7. Rectifier without Filters (Full wave & Half wave)
8. Rectifier with Filters (Full wave & half wave)

Note: Total 12 experiments are to be conducted. (Six experiments from PART-A, Six experiments from PART-B)

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
II Year B.Tech. M.E. Production I-Sem L T/P/D C
- -/3/- 2
ELECTRICAL AND ELECTRONICS ENGINEERING LAB

Section A: Electrical Engineering:

The following experiments are required to be conducted as compulsory experiments :

1. Swinburne’s test on D.C. Shunt machine. (Predetermination of efficiency of a given D.C. Shunt machine working as motor and generator).
2. OC and SC tests on single phase transformer (Predetermination of efficiecy and regulation at given power factors)
3. Brake test on 3-phase Induction motor (Determination of performance characteristics)
4. Regulation of alternator by Synchronous impedance method. In addition to the above four experiments, any one of the experiments from the following list is required to be conducted :
5. Speed control of D.C. Shunt motor by
   1. Armature Voltage control
   2. Field flux control method
6. Brake test on D.C Shunt Motor

Section B: Electronics Engineering:

1. Transistor CE Characteristics (Input and Output)
2. Full wave Rectifier with and without filters.
3. CE Amplifiers.
4. RC Phase Shift Oscillator
5. Class A Power Amplifier
6. Micro Processor