Well Logging Mid - II, November - 2014

1.For core analysis different sample from selected internals are taken for analysis is known as
  • Plugs
  • corebullets
  • conventional cores
  • exprosion
Answer: A
2.______________ are routinely analysis for porosity fluid saturation and permeability.
  • Plugs
  • core bullets
  • conventional cores
  • exprosion
Answer: C
3._________________ equipment is used to record the radiation of the natural radio activity of the formation.
  • Plugs
  • core bullets
  • conventional cores
  • exprosion
Answer: A
4.In side well coring _______are used to run the coring analysis
  • Plugs
  • core bullets
  • conventional cores
  • exprosion
Answer: B
5.______ helps for the flow of oil from the production formation in to the well bore
  • Gamma rays logging
  • corebullets
  • conventional cores
  • perforatio
Answer: D
6.______ device used to perforate oil and gas well in preparation for production.
  • Perforating gum
  • core bullets
  • conventional cores
  • perforatio
Answer: A
7.Cement bond are still running today because they are _____
  • Expo resin
  • Accurate
  • inexpo resin
  • Older & accurate
Answer: C
8.SP deflection low gamma ray count mud cake indicator are the permeable indicator of the formation of ____
  • NMR
  • Quick look log
  • neutron log
  • free point indicator
Answer: B
9.The following are the advantage of SWC [side wall coring]
  • Effective and in expression
  • Time saving and expressive
  • Cast saving & quick handling of core sludge
  • Time casting and expansive
Answer: C
10.Large bore risers is greater than ______ inches
  • 2
  • 21
  • 0
  • 1
Answer: B
11.Most cased hole logs have a GR and and ______________ for depth control.
Answer: Casing collor log(CCL)
12.The CBL log uses convertible _______ log principle of reflection to make its measurement.
Answer: Sonic
13.The ________ tool responds to the electron density of the fluid in the bore hole.
Answer: Density
14.In core of drill pipe stuck and not able to drill further___________ tool is used.
Answer: Free point indicator
15.Formation fluid testing involves taking fluid sample from the formation and measuring their _________
Answer: Pressure
16.The chief application of ________________ tool is to determine moveable fluid volume of a rock.
Answer: Nuclear magnetic resonance
17.In ____________ all hydrocarbon indication from the rock sample and oil and gas entrained in the drilling mud are found.
Answer: Mud logging
18.Total gas in the mud is measured in units of ____________ but does not represent the actual quantity of oil & gas in the reservoir.
Answer: Parts per million
19.In ____________ a part of the drilling core is being examined in the detailed.
Answer: Coring
20.For identification of porosity __________ log is used.
Answer: Neutron