Well Logging Mid - I, September - 2014
1.The main uses of GR-log are
-
To determine hydrogen content in the formation
-
To determine porosity in the formation
-
To identify sand-shale zones in the formation
-
To identify interval travel time
-
Answer: C
2.Borehole enlargement are most commonly observed in
-
Shale & shaly formations
-
Sandy formations
-
Silty formations
-
Hard and compact rocks
-
Answer: A
3.Section drilled in gauge means
-
Borehole diameter is larger than bit-size
-
Borehole diameter is less than bit-size
-
Borehole diameter is equal to the bit-size
-
All the above
-
Answer: C
4.In the well log sheet SP-Curves are plotted in the
-
1st track-linear scale
-
2nd track-logarithmic scale
-
3rd track-linear scale
-
1st track-logarithmic scale
-
Answer: A
5.What is the full form of LWD in logging
-
Lowering while drilling
-
Logging while drilling
-
Log with diameter
-
None of the above
-
Answer: B
6.Common value of matrix-density (g/cm3) of sand or sandstone is
-
2.98
-
2.87
-
2.65
-
2.71
-
Answer: C
7.The SP observed in boreholes is of __________________origin.
-
Electrokinetic & electrochemical
-
Electromagnetic
-
Thermal
-
Electromagnetic and electrokinetic
-
Answer: A
8.Football effect (crossover between neutron-porosity curves) normally indicates
-
Salt water bearing zone
-
Fresh water bearing zone
-
Gas bearing zone
-
None of the above
-
Answer: C
9.Formation resistivity factor (F) depends on
-
The tortuosity of the rock
-
The porosity of the rock
-
Both (a) & (b)
-
Other factors, not the factors (a) & (b)
-
Answer: C
10.Rt (True Resistivity) of the formation is the resistivity of
-
Mud cake
-
Flushed zone
-
Transition zone
-
Un-invaded zone
-
Answer: D
11.Resistivity of the mud-filtrate can be expressed by symbol____________________.
Answer: Rmf
12.Caliper tool mainly measures the____________________.
Answer: diameter of borehole
13.Generally subsurface temperature varies ____________________with depth.
Answer: linearly
14.The most abundant source of natural radioactivity is the radioactive isotope of____________________.
Answer: potassium‐K40
15.____________________ may formed in the borehole wall when mud filtrate invades in the permeable zone.
Answer: mud cake
16.The full form of MSFL is____________________.
Answer: micro‐spherical focused log
17.Formation water resistivity (Rw) can be derive frequently with the help of____________________ Log.
Answer: Essp
18.Bulk density of the formation can be measured with ____________________ tool.
Answer: litho‐density
19.Presence of secondary porosity usually complicates the quantitative evaluation of____________________log.
Answer: sonic
20.The neutron log helps to understand the __________________content of the formation.
Answer: hydrogen